2001 Arctic Cat ATVs factory service and repair manual, Page 350Get this manual
2Drain the brake fluid from the entire hydraulic system (master cylinder, hoses, and caliper)Fig6-184
ASSEMBLINGINSTALLING
1Push the pistons into the caliper as far as they will go to allow clearance for the brake pads
! CAUTION
Care should be taken that the piston and cylinder are not scratched
2Install the brake pads and secure with the pin and cotter pinFig6-186
! CAUTION
Brake fluid is highly corrosiveDo not spill brake fluid on any surface of the ATV and do not reuse brake fluid
3Remove the brake hose from the caliper; then remove the caliperFig6-185