2001 Arctic Cat ATVs factory service and repair manual, Page 331Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 331

21Install the camshaft assembly into the housing coverFig6-88

NOTE: This reference mark should be drawn on the right side of the first detent which is next to the shift fork locating pin groove

19While holding the camshaft with the detents facing downward, install the camshaft into the locking cam making sure the alignment lines are alignedNOTE: The locking cam detent must be in the downward positionFig6-86

22Install the shift fork and the dog into the housing coverFig6-89

Back to 2001 Arctic Cat ATVs factory service and repair manual