2001 Arctic Cat ATVs factory service and repair manual, Page 312Get this manual
Headlights The connectors are the two 3-prong ones secured to the front bumper supports (one on each side) with cable tiesFig5-59
3With the dimmer switch in the LO position, the meter must show battery voltage4With the black tester lead still connected, connect the red tester lead to the yellow wire5With the dimmer switch in the HI position, the meter must show battery voltageNOTE: If battery voltage is not shown in either or both tests, inspect the fuses, battery, main wiring harness, connectors, or the left handlebar switch
KEY 1Lock Washer 2Headlight Assy 3Bulb 4Machine Screw 5Cap Screw 6Cap Screw 7Nut 8Cap Screw 9Guard 10Headlight Mount 11Headlight Yoke 12Screen 13Nut
TaillightBrakelight