2001 Arctic Cat ATVs factory service and repair manual, Page 297Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 297

NEUTRAL POSITION LIGHT
1Connect the jumper positive wire to the power source terminal on the indicator light connector2Connect the jumper ground wire to the neutral terminal on the indicator light connector3The neutral position indicator light should illuminateREVERSE POSITION LIGHT

OIL TEMPERATURE LIGHT VOLTAGE (250300 cc) NOTE: The ignition switch must be in the ON position, and the test must be performed on the lower side of the switch

Back to 2001 Arctic Cat ATVs factory service and repair manual