2001 Arctic Cat ATVs factory service and repair manual, Page 290Get this manual
3When the brake pedal is depressed, the meter must show less than ohmNOTE: If the meter shows more than ohm of istanceroubleshoot or replace the switchcomponent, the connector, or the switch wiring harness
Brakelight Switch
(Handlebar Control)
3The meter must show battery voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, switch, or the main wiring harnessNOTE: If the meter shows battery voltage, the in iring harness is good; test the switchcomponent, the connector, and the switch wiring harness for resistanceRESISTANCE (Brakelight Switch Connector)
The switch connector is the two-prong black connector in front of the steering postTo access the connector, the front rack and front fenders must be removed (see Section 8)NOTE: The ignition switch must be in the ON positionVOLTAGE (Wiring Harness Connector)