2001 Arctic Cat ATVs factory service and repair manual, Page 281Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 281

Fig4-139
Fig4-142

5Compress the tabs on the coolant hose clamps and slide the clamps away from the hose ends approximately 51 mm (2 in; then remove both hoses from the water pumpFig4-140

DISASSEMBLING

1Finish removing the two Phillips-head cap screws securing the cover to the bearing housing; then remove the coverAccount for the O-ring2Remove the E-ring securing the impellershaft to the bearing housing; then remove the impellershaftFig4-143

Back to 2001 Arctic Cat ATVs factory service and repair manual