2001 Arctic Cat ATVs factory service and repair manual, Page 273Get this manual
4Install the oil pump into the engine (see Right-Side Components in Section 3) Oil Cooler
(250300 cc)
Testing Oil Pump Pressure
Fig4-114
KEY 1Oil Cooler 2Grommet 3Cap Screw 4Washer 5Collar 6Hose Clamp 7Hose (Output) 8Hose (Input) 9Cap Screw 10O-Ring 11Fitting (Angled) 12Fitting
NOTE: The engine must be warmed up to operating temperature for this test
1Connect the Arctic Cat Engine Tachometer (pn 0644-275) to the engine2Connect the Oil Pressure Gauge (pn 0444-039) to the oil filter drain plugNOTE: Some oil seepage may occur when installing the oil pressure gaugeWipe up oil residue with cloth
3Start the engine and run at the specified RPM4The oil pressure gauge must read as specified250300 cc
OIL PRESSURE 1275 RPM 0.7-2.8 kgcm2 (10-40 psi) Oil Temperature-60C (140F) REMOVING
0733-727