2001 Arctic Cat ATVs factory service and repair manual, Page 262Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 262



7Secure the needle jet holder with wrench; then remove the main jet8Remove the needle jet holder; then remove the slow jet and the starter jet9Remove the pilot air screwFig4-75

NOTE: Turn the pilot air screw clockwise until it is lightly seated; then turn it counterclockwise 14 turns as an initial settingNOTE: Note the locations of the jets and holder during assembling proceduresFig4-77

Back to 2001 Arctic Cat ATVs factory service and repair manual