2001 Arctic Cat ATVs factory service and repair manual, Page 259Get this manual
2Remove the shift handle cap; then remove the torx-head screw securing the handle and remove the handleFig4-59
6Loosen the outer jam nut securing the throttle cable to the carburetor body; then route the cable out of the wayFig4-57
3Remove the hardware securing the right-side panel; then remove the panel4On the automatic transmission model, remove the cap screw and nut securing the belt cooling duct to the frameLoosen the clamp securing the duct to the cooling shroud; then remove the belt cooling ductFig4-60