2001 Arctic Cat ATVs factory service and repair manual, Page 245Get this manual
Inspecting
1Inspect the gear, pins, and keyway for wear2Inspect the springs for damage or fatigueAssembling
3Using pair of needle-nose pliers, insert each remaining spring part way into the slot; then install pin and push the springpin assembly into the slotFig3-932
1Align the alignment marks of the driven gear and inner raceFig3-930
4Install the thrust washer and spring washer (with its raised inner portion directed away from the gear); then install the circlip with the sharp edge facing away from the gearCC183D