2001 Arctic Cat ATVs factory service and repair manual, Page 224Get this manual
Fig3-836
Cleaning and Inspecting NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all components2Inspect the springs and ratchet for wear or damage3Inspect the reel and housing for cracks or damage4Inspect the shaft for wear, cracks, or damage5Inspect the rope for breaks or frayingB604D
7Carefully lift the recoil free of the case making sure the spring does not accidentally disengage from the caseFig3-837
6Inspect the spiral spring for cracks, crystallization, or abnormal bends7Inspect the handle for damage, cracks, or deteriorationAssemblingInstalling
1If removed, insert the spring into the housing with the outer end of the spring around the mounting lug in the housing; then wind it in counterclockwise direction until the complete spring is installedNOTE: The recoil spring must seat evenly in the recoil caseFig3-838