2001 Arctic Cat ATVs factory service and repair manual, Page 203Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 203

NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster shaft tension will be released in step 22 Fig3-743

21Place the chain tensioner adjuster assembly and gasket into position on the cylinder and secure with the two Allen-head cap screwsFig3-740

23Rotate the crankshaft until the second cap screw securing the sprocket to the camshaft can be installed; then install the cap screw (coated with red Loctite #271) and tighten to 1.5 kg-m (11 ft-lb)Bend the tab to secure the cap screwCC011D

Fig3-741

Back to 2001 Arctic Cat ATVs factory service and repair manual