2001 Arctic Cat ATVs factory service and repair manual, Page 197Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 197

Fig3-713
Installing Top-Side Components
APiston BCylinder
Fig3-715

10Install the shift arm on the shift arm shaft making sure the scribed marks (from removing) are alignedTighten securely11Place the starter cup into position on the crankshaft making sure new, lubricated O-ring is inside the cupTighten the flange nut to 3.5 kg-m (25 ft-lb)Fig3-714

KEY 1Cylinder 2Stud Bolt 3Nut 4Cylinder Gasket 5Pin 6Water Hose Union 7Cap Screw 8O-Ring

0732-301

Back to 2001 Arctic Cat ATVs factory service and repair manual