2001 Arctic Cat ATVs factory service and repair manual, Page 191Get this manual
2Lightly oil all bearings and grease all shafts in the right-side crankcaseFig3-685
6From the right side, install the five case half mm cap screws (two inside the case); then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
7From the left side, install the eight case half mm cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
8From the right side, install the three case half mm cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occursCC694
Fig3-686
9In crisscrosscase-to-case pattern, tighten the mm cap screws until the halves are correctly joined; then tighten to 2-2.4 kg-m (14.5-17 ft-lb)Fig3-688