2001 Arctic Cat ATVs factory service and repair manual, Page 188Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 188

Fig3-670
Assembling Crankcase Half
1Install the output shaft assembly into the crankcase making sure the two gears, shim, washer, and nut are properly sequencedFig3-668

Fig3-671

NOTE: The beveled side of the secondary drive gear must face upward
2Apply red Loctite #271 to the threads of the output shaft; then secure with the nutTighten nut to 10 kg-m (72 ft-lb); then using punch, peen the nutFig3-669

Back to 2001 Arctic Cat ATVs factory service and repair manual