2001 Arctic Cat ATVs factory service and repair manual, Page 172Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 172

32Remove the shift indicator connector from the main wiring harness33Remove the cap screw securing the engine ground wire to the engineFig3-583
Fig3-586

35Remove the cotter pin and washer securing the shift linkage to the selector armAccount for bushing and washerCC542A

34Remove the three engine mounting through-boltsAccount for washer on the upper bolt and spacer on the lower front boltFig3-584

36Slightly raise the front of the engine; then remove the front driveshaft coupler from the engineFig3-587

Back to 2001 Arctic Cat ATVs factory service and repair manual