2001 Arctic Cat ATVs factory service and repair manual, Page 152Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 152

Fig3-483
Fig3-486

3Install the starter idle gear pin into the crankcase; then with the beveled side of the idle gear facing the crankcase, install the idle gearFig3-484

6Place the splined driven bushing onto the driveshaft making sure the oil hole of the splined bushing aligns with the oil hole of the driveshaft
! CAUTION
It is important that the oil holes in the splined bushing and driveshaft alignIf they are not aligned, major damage will occur from lack of lubricationFig3-487

Back to 2001 Arctic Cat ATVs factory service and repair manual