2001 Arctic Cat ATVs factory service and repair manual, Page 151Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 151

Fig3-478
Installing Left-Side Components
AIdle Gear Assembly BMagneto Rotor

1Place the starter into position on the crankcase and secure with the cap screwsNote the position of the wiring formCC511D

Fig3-481

16In crisscross pattern, tighten the cap screws to 0.9-1.3 kg-m (6.5-9.5 ft-lb)17Install the spacer onto the crankshaft; then secure with flange nutFig3-479

Back to 2001 Arctic Cat ATVs factory service and repair manual