2001 Arctic Cat ATVs factory service and repair manual, Page 147Get this manual
FWater Pump GOil Filter NOTE: Steps 1-22 of the preceding sub-sections must precede this procedureNOTE: Lubricate all internal components with 10W-40 oil prior to installing the right-side cover Fig3-459
23Place the water pump drive joint into position on the water pump shaft making sure the pin is properly positionedFig3-457
25Tighten the cap screws in crisscross pattern to 0.9-1.3 kg-m (6.5-9.5 ft-lb)26Place the water pump cover onto the right-side cover making sure the new O-ring is properly positionedTighten securely with the three cap screwsFig3-460