2001 Arctic Cat ATVs factory service and repair manual, Page 143Get this manual
Fig3-434
Fig3-437
6Attach the spring to the gear shift cam stopper armFig3-435
CStarter Clutch Housing DPrimary Driven Gear EPrimary Driven Clutch NOTE: Steps 1-7 in the preceding sub-section must precede this procedure
8Install the spacer, pin, and oil pump drive gear onto the crank balancer shaft making sure the shoulder of the drive gear is facing inward toward the crankcase; then secure with the washer and nut tightened to kg-m (58 ft-lb)Fig3-438