2001 Arctic Cat ATVs factory service and repair manual, Page 141Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 141

3From the left side, install the three case half mm cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occursFig3-425
Fig3-427

6From the right side, install the five case half mm cap screws (one inside the case); then tighten only until snugCC098D

NOTE: Rotate the shafts back and forth to ensure no binding or sticking occursFig3-428

4From the right side, install the three case half mm cap screws (two inside the case); then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occursFig3-426

Back to 2001 Arctic Cat ATVs factory service and repair manual