2001 Arctic Cat ATVs factory service and repair manual, Page 113Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 113

11Remove the four cap screws securing the rear output joint to the transmission and push the shaft away from the transmissionFig3-275
Fig3-277

14Disconnect the high tension lead from the spark plug15Disconnect the battery ground (negative) cable from the crankcase cover; then disconnect the positive cable from the starter motorFig3-278

12Detach the carburetor using the following procedureALoosen the clamps securing the carburetor boot and the air inlet bootFig3-276

Back to 2001 Arctic Cat ATVs factory service and repair manual