2001 Arctic Cat ATVs factory service and repair manual, Page 99Get this manual
Fig3-208
Installing Top-Side Components
APiston BCylinder
Fig3-211
20Place the starter cup into position on the crankshaft making sure new, lubricated O-ring is inside the cupTighten the nut with lock washer to 3.5 kg-m (25 ft-lb)Fig3-209
300 cc only
KEY 1Cylinder 2Stud Bolt 3Stud Bolt 4Stud Bolt 5Stud Bolt 6Nut 7Cylinder Gasket 8Pin 9O-Ring
0733-744