2001 Arctic Cat ATVs factory service and repair manual, Page 88Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 88

Fig3-152
2Using plastic mallet, lightly tap the case halves together until cap screws can be installed3From the left side, install the shift cable bracket and the crankcase cap screws noting the location of the different-lengthed cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screwsFig3-155

16If applicable, install the oil breather screen noting the direction of the tabs from disassemblyFig3-153

Fig3-156

Back to 2001 Arctic Cat ATVs factory service and repair manual