2001 Arctic Cat ATVs factory service and repair manual, Page 53Get this manual
4Rotate the V-belt and clutches until the V-belt is flush with the top of the driven clutchNOTE: Before proceeding, make sure the foot brake pedal return spring is properly positioned as shownFig2-119
6Place the brake pedal return spring in the hole in the frameFig2-122
7Secure the master cylinder push rod to the brake pedal with washer and cotter pinCC555A
Fig2-123
5Place the V-belt cover gasket into position; then install the cover and secure with the cap screws making sure the different-lengthed cap screws are in their proper locationTighten the cap screws to 1.1 kg-m (8 ft-lb)Fig2-120