2001 Arctic Cat ATVs factory service and repair manual, Page 40Get this manual
TIRE INFLATION PRESSURE
On all models, front and rear tire inflation pressure should be 0.35 kg-cm2 (5.0 psi)A low-pressure gauge is provided in the tool kit to measure the air pressure in the tiresCheck the air pressure in all tires before each use of the ATV
Steering Components
4Rotate adjustment screw #2 alternately clockwise and counterclockwise to ensure free movement without binding; then lock the jam nut securing adjustment screw #25Rotate adjustment screw #1 clockwise 18 turn; then lock the jam nut securing adjustment screw #1NOTE: At this point the clutch should be adjusted correctlyTest to ensure accurate adjustment
The following steering components should be inspected periodically to ensure safe and proper operationAHandlebar grips worn, broken, or looseBHandlebar bent, cracked, and equal and complete full-left and full-right capabilityCSteering post bearing assemblybearing housing broken, worn, or bindingDBall joints worn, cracked, or damagedETie rods bent or crackedFKnuckles worn, cracked, or damagedGCotter pins damaged or missing