2000 Arctic Cat ATV Factory Service Manual, Page 277Get this manual
3Remove the brake hose from the caliper; then remove the caliperFig6-187
Fig6-188
3Place the brake caliper assembly into position and secure with the cap screws tightened to 2.8 kg-m (20 ft-lb)4Place new flat washer on each side of the brake hose fitting and install it on the caliperTighten to 2.8 kg-m (20 ft-lb)5Fill the master cylinder; then bleed the brake system (see Section 2)6Install the wheelTighten the cap screws to 6.9 kg-m (50 ft-lb)Fig6-189
CLEANING AND INSPECTING