2000 Arctic Cat ATV Factory Service Manual, Page 230Get this manual
NOTE: If the meter shows no resistance, the relay is out of tolerance or it must be replaced 6With the 12-volt power supply still connected, connect the red tester lead to the heavy battery cable terminal; connect the black tester lead to the heavy starter motor cable terminal7The meter must show less than ohm8With the 12-volt power supply disconnected, connect the red tester lead to terminal #3; connect the black tester lead to terminal #49The meter must show 3.6 ohms 20NOTE: If the meter shows no resistance, the relay is out of tolerance or it must be replaced
Starter Relay
(400500 cc)
CDI Unit
(250300 cc)
0732-513