2000 Arctic Cat ATV Factory Service Manual, Page 196Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 196

INSTALLING (250300 cc)

1Place the carburetor into the two carburetor boots and tighten the flange clampsFig4-47

4Route the two vent hoses through the slots in the frameCH049D

2Place the throttle cable into the carburetorUsing screwdriver, rotate the actuator arm to the full-up position; then using pair of needle-nose pliers, install the cable into the actuator arm drumFig4-48

Back to 2000 Arctic Cat ATV Factory Service Manual