2000 Arctic Cat ATV Factory Service Manual, Page 148Get this manual
Fig3-531
Fig3-534
14Install the clutch sleeve hub making sure the marks scribed in removing are alignedThe alignment dots must also be aligned to assure that the clutch assembly works properlyFig3-532
! CAUTION
The clutch sleeve hub and the clutch pressure disc must be seated in the proper positionIf any of the incorrect positions are used, the hub and disc will have clearance between them and they will not operate properly
15Simultaneously, place the primary driven clutch assembly and the starter clutch housing on their respective shafts making sure the sleeve is properly positioned in the primary assemblyFig3-535